Standard End Suction Pump

Introduction

The standard end suction pump adopts rear open structure and directly driven by motor or other power through elastic coupling. It is widely used in industries and mines, fire protection, construction, urban water supply and drainage, agricultural irrigation and other fields.It is designed by ISO 2858 standard.

Application

1. HVAC heating equipment, ventilation equipment and air conditioning equipment

2. Fire fighting

3. Water circulation

4. Liquid transfer

5. Agricultural irrigation

6. Cooling

7. Pressurization

Design and main materials

Structure: horizontal, single-stage, single suction, volute type, rear opening structure

Outlet diameter (mm): 32 - 250

Flange standard: standard configuration: DIN2501; Optional configuration: ANSI B16.5 class 150Lb

Pump body: standard configuration: Cast iron HT200; Optional configuration: Ductile iron QT400-18, SS 304/ 316

Impeller: standard configuration: Brass h 65; Optional configuration: cast iron HT200, stainless steel 304/ 316

Shaft: standard configuration: 2Cr13; Optional configuration: SS 304/ 316,

Shaft seal: standard configuration: mechanical seal; Optional configuration: packing seal

Technical parameter

Flow (q): 2-1100 m³ / h

Lift (H): 2-152m

Rated speed: 1450 2900 RPM (50Hz), 1750 3500 rpm (60Hz)

Rated temperature: - 10 degree to 105 degree

Max working pressure: 1.2 MPa, for special requirements to up to 1.6Mpa

Popularne Tagi: standard end suction pump, China, suppliers, manufacturers, factory, price, pricelist, Pompa odśrodkowa wodna, Pompa odśrodkowa z końcowym ssaniem, Końcowa pompa ssąca, Końcowa pompa wody ssąca, Standardowa pompa ssąca na końcu